How To Drain Water From Keurig 2.0 For Storage – A Step By Step Guide

Keurig 2.0 is widely used among other Keurig machines. Enjoying a cup of coffee in the morning and leaving the Keurig without draining water is not ethical. Moreover, it can decrease the shelf life of your Keurig. Furthermore, Keurig 2.0 doesn’t have a drain plug. That’s why you must know how to drain water from the Keurig 2.0 for storage? Otherwise, your Keurig 2.0 would be at a higher risk of mold growth.

Keurig 2.0 is the best single-serve coffee maker. It carries a hot water reservoir and K-cup to brew an instant cup of Joe. Moreover, it prevents you from the struggle of making coffee at home without a coffee maker. Above all, when comparing Keurig vs Regular Coffee Maker, it’s one of the cheapest ways of making coffee in no time.

But, the proper use and maintenance are essential if you want your Keurig 2.0 to work correctly. For instance, if you don’t drain water from the Keurig regularly, it can cause mould development. Let’s learn how to drain water from Keurig 2.0.

Why is it essential to drain water from the Keurig 2.0?

If you want to know how to drain water from the Keurig 2.0, you must know its importance. Like Keurig K50 and K55, K 2.0 also has a reservoir that can retain a cup of water in it. This water is essential to drain when required to maintain the machine in the best working condition. The following reasons make the water draining from Keurig 2.0 is necessary:

You need to drain the water from Keurig 2.0

• When you’ve to carry it with you.
• When you need to pack the Keurig for shipping or storage.
• To keep it clean.
• To remove any unwanted substance that gets into the water reservoir of your Keurig. Otherwise, bacteria or mold may appear in the water tank, leading to a bitter taste of coffee.
• To prevent the coffee maker from damaging due to frozen water in the cold environment. Moreover, to keep your machine in working condition, don’t forget to warm the Keurig 2 h before use.

If you don’t know how to drain water from the Keurig 2.0 for storage, don’t worry. We’re here with a complete guide to let you know how you can drain water from a Keurig coffee maker. We’ll discuss two ways to drain the water from your coffee machine instantly. Let’s discuss both methods one by one. 

How to drain water from the Keurig 2.0 for storage?

Knowing how to use a Keurig is not sufficient; you must know the methods to maintain it. You have to clean your machine regularly and drain it before storage. When it comes to cleaning, there are various methods available. Even you can clean your coffee maker without using vinegar. 

In the same way, when it comes to how to drain water from a Keurig coffee maker, there are two methods:

1. Draining water from Keurig without disassembling
2. Draining water from Keurig with disassembling

METHOD 1: Draining water from Keurig 2.0 coffee maker without disassembling

Time required: 5-8 minutes

Tools needed: no specific device is required

However, if you wonder how I can drain water from the Keurig 2.0 coffee maker without disassembling? Here’s a straightforward method. This method is good enough because it allows you to empty Keurig 2.0 when you’re short on time. 

There are two water tanks in the Keurig 2.0. One is the external tank, and the other is an internal tank. The internal tank keeps one cup of hot water ready for your use. However, your coffee maker can brew the coffee only whenever the external tank is full of water.

You can remove the water from the internal tank by tricking your machine that the external tank is full of water. To trick your Keurig 2.0, follow these steps.

Step 1: Adjust the float:

• First of all, empty the external tank of your Keurig 2.0. 
• Now you will see the word prime on the LCD screen of your Keurig. It indicates that there is no water in the tank of your coffee machine. However, you aim to trick the machine. So, you have to adjust the float. 
• Look at the lower inside of the reservoir. You will find a metal disk there. This metal disk indicated the amount of water that the external tank of your Keurig carries. 
• Pull this metal disk to drag it to the top. 
• Push it gently to maintain its position. 
• Put the reservoir lid to its original position. 
• Keurig will behave in the way of a machine with a full water tank. 

You can take help from the coffee machine manual to learn more about the process. 

Step 2: Start Brewing

• Press the brew button
• Allow the machine to brew usually. However, you should not put the coffee pod as it’s a false brewing process without a coffee machine.
• The machine will start using the water in the internal tank to brew a cup of coffee for you.
• Place a cup to collect the drained water from the brewing machine.

Step 3: Wait For The “Prime” Display:

After the first two steps, your Keurig 2.0 may display either of the two following messages:

• There will be a “Prime” display on your Keurig’s LED display. It shows that the machine has done brewing. Or you can say that your machine’s internal reservoir is empty.
• However, your coffee machine may give you a signal to “add more water.” It means your Keurig 2.0 is not empty yet. In such a situation, repeat the procedure to fully drain water from the internal reservoir of the Keurig 2.0.

METHOD 2: Draining water from Keurig 2.0 coffee maker by disassembling

Time required: 10-15 minutes

Tools required: 

• Phillips-head screwdriver 
• Plastic syringe
• Needle-nose pliers

Draining Keurig 2.0 by disassembling is a long and complex process. To proceed smoothly with this process, locate all the parts of the Keu 2.0 after reading the manual. Let’s learn this method step by step so that you can quickly drain water from your Keurig 2.0.

Step By Step Guide

Step 1: Remove the chrome rings:

First of all, you should remove the chrome rings present at the top back of the Keurig 2.0. However, you need to detach the snapping points that are connecting these chrome rings. Apply slight force to push in and up these snaps to remove them. 

Step 2: Remove the screws present at the bottom of Keurig 2.0:

To drain water from the Keurig 2.0, it’s essential to open your machine’s whole front and side panel. And opening the bottom is necessary to do so. 

Use a screwdriver, particularly a Philip-head screwdriver, to open all the screws at the bottom of your Keurig. However, a Philip-head screwdriver is not essential; you can also use a butter knife to open these screws. 

Step 3: Remove the brewer’s front.

Now detach the front side of the brewer to see all its parts clearly. If there is a silver plastic piece on your coffee maker, remove it first. After that, you can easily remove the front portion with a simple sliding. You may have to apply considerable force to remove that front part. 

Step 4: Position the brewer in the upright position: 

Now, position your Keurig such that its water reservoir side is towards you. On this side, you’ll see two screws. Remove these screws and some other plastic snaps. You can use a spatula with some force to have the entire machine open. Now there will be the only exterior casing that we’ll remove in the next step.

Step 5: Expose all the interior components:

The exterior casing will restrict your access to the interior components. So, it’s vital to remove this outer casing. It’s wrapped around the coffee machine in such a way that it covers the sides and bottom. Moreover, plastic snaps affix it to the bottom of the machine. You can easily remove it by applying a little force with the help of a spatula. 

Step 6: Detach the water containing assembly to drain it:

It’s time to focus on our primary purpose. We have successfully reached the internal part of the machine. 

• Locate the water intake assembly.
• Disconnect it from the tubes that are attached to it. 
• Remove the water intake assembly.
• Press black intake piece from the middle to drain all water.
• Press until the maximum water is removed. 
• After draining maximum water, set it aside. 

Step 7: Free the internal filters:

Remove the two screws that are connecting the internal filter and water tank. 

• Locate the first screw at the motherboard bottom and remove it. 
• Locate the second screw with a white plastic washer. Remove it also with the Phillips-head screwdriver. 
• Slide the whole assembly gently to unhinge the assembly.

Step 8: Detach all the internal components.

After unhinging the water assembly, it’s time to detach all of them one by one.

• Detach all the internal components one by one. 
• First, detach the filter from the pump. Water will start draining out.
• Secondly, detach the tube present at the water tank tube. As the water will start draining out, air will begin displacing the water there. 
• In the end, drain the brewer. For this purpose, remove the pipe that’s connecting the pump and water assembly. It’ll allow the water to flow out immediately. Make sure it’s near a sink so that there is no mess. 

Step 9: Reassemble the Keurig 2.0

Now, follow all the steps from bottom to top to reassemble your machine. After reassembling, you can store your machine without the fear of being frozen and get infected with mold. 

FAQ’s

How can you use the drain button on Keurig?

If your Keurig comes with a drain button, you can use it for draining water through it. Follow these steps to use the drain button effectively. 

• Place the brew selector in the “Drain” position. The green light will give you a signal to drain the water. 
• Press and hold the drain button. Water will start flowing into the water reservoir. 
• Release the button when water stops flowing. No water flow indicates that there is no water in the internal tank of the Keurig.  

Is it okay to leave water in your Keurig?

It’s advisable not to leave water for 2-4 days in your Keurig. After this time, you should clean your Keurig’s water reservoir. It would be best to drain the Keurig for storage. Otherwise, there are chances for mold and bacteria to grow there. You know very well moist conditions encourage their growth. 

Do mold grow inside Keurigs? 

Yes, Keurigs are also prone to mold growth if not cleaned properly. It’s advisable to run hot water through the Keurig. Moreover, it would be good if you drain the Keurig completely to avoid mold growth. 

What happens if you don’t descale your Keurig?

Scaling means minerals will start building up in your machine. If you don’t descale it, 

• Your coffee machine would stop working as minerals will clog it.
• Your coffee maker will not be able to achieve the optimum brewing temperature. Consequently, your coffee machine can’t extract the coffee altogether.
• The taste of your coffee may become bitter. 

Can you run soapy water through a Keurig?

Yes, if you run the soapy water with vinegar, it can clean your Keurig effectively. For instance, it’ll remove all the oil stains from your machine. Moreover, it’ll also help to prevent the mineral build-up in the Keurig. 

Final Thoughts:

No doubt, the right way to store the Keurig is after draining all the water from the external and internal tanks. So, it’s become essential to learn how to drain water from Keurig 2.0 for storage. Well, we have discussed two methods. One method involves the water draining from the Keurig without disassembling it. On the other hand, you have to disassemble the whole machine in another way. When it comes to effectiveness, the disassembling method is more effective. It can drain maximum water from your Keurig K 2.0. However, it’s up to you which way you want to choose.